Finishing guide

This guide of typical finishes is to assist in communicating with customers. Specifying these finishes on part drawings will aid the mold maker in providing the proper finish to the mold. Since the finish will vary with different materials, this should be used only as a guide.

SPI FINISH GUIDE
A - 1 GRADE #3 DIAMOND BUFF
A - 2 GRADE #6 DIAMOND BUFF
A - 3 GRADE #15 DIAMOND BUFF
B - 1 600 GRIT PAPER
B - 2 400 GRIP PAPER
B - 3 320 GRIP PAPER
C - 1 600 STONE
C - 2 400 STONE
C - 3 320 STONE
D - 1 DRY BLAST GLASS BEAD #11
D - 2 DRY BLAST #240 OXIDE
D - 3 DRY BLAST #24 OXIDE
HOME | SERVICES | THE ART | FINISHING GUIDE | DELTA SUPPLIES | PORTFOLIO | CONTACTS
Copyright The Mold Polishing Co. Inc.       Designed and Hosted by MicroServer.com